Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1
  1. #1

    Question Cleaning Tips for an EPSON XP600 Printhead

    Cleaning Tips for an EPSON XP600 Printhead


    There are a couple different approaches to cleaning a printhead, depending on what type of Epson xp600 printhead you have. There are two types of Epson xp600 printheads you should be aware of, an integrated printhead and a printhead that is built into the printhead. Below are some important CleaningTips for an EPSON XP600 Printhead.
    An integrated printhead is a printhead that is built into the ink cartridge itself. These printheads are considered disposable printheads as they are disposed along with the used ink cartridge when the ink cartridge is replaced. Cartridges with integrated printheads usually more expensive than a cartridge that doesn’t have an integrated printhead.

    For cartridges that are ink tanks the printhead is separate from the ink tank itself. The printhead may be permanently installed in the printhead itself or can be a replaceable maintenance item. Ink tanks are generally less expensive than ink cartridges with the printhead integrated. With the printheads separated the colors can also be split into individual ink tanks allowing only the color that is depleted to be replaced rather than the entire cartridge as in the case of a tri-color cartridge.
    First, try printhead Cleaning Tips for an EPSON XP600 Printhead:
    Most printheads have a built-in cleaning function. This is the easiest way to solve a clogged printhead problem. Consult your printhead’s manual to run the appropriate cleaning function, the cleaning process generally takes a couple of minutes. Once it is completed, print a diagnostic page. If the test pattern is crisp, you are ready to print! If the quality is still poor, let the printhead sit for about 10 minutes before running a second cleaning, this allows the ink to soak on the printhead. It might take a couple of cleanings to get a cartridge properly primed, especially if the printhead has been sitting for a while.
    If your printhead uses cartridges with an integrated printhead, you can also try the “paper towel method”:

    Another Cleaning Tip for an EPSON XP600 Printhead is Take a warm damp paper towel or coffee filter and blot the cartridge with the print heads facing down onto the paper towel to remove the dried ink on the print head. Then, taking a DRY paper towel or coffee filter, hold the cartridge down against the paper towel for 2-3 minutes. A dry paper towel will wick the ink out. Do not wipe the print head as this may cause damage.
    Last edited by Mecan Printers; 08-21-2018 at 03:57 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •