Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1

    I have a EF5 error code Has any one seen this? Is it the Cartridge or power supply? PLEASE HELP


  2. #2
    Member
    Join Date
    Aug 2004
    Location
    port huron, mich.
    Posts
    53
    i don't have the service manual for the 2700cn, but i do for the 2600cn. in that manual, EF5 code means charger/high voltage unit error. i'm sure it is probably the same on this model. i'm also pretty sure that the main charger is built into the opc unit. most likely, the charger is dirty or shorting. i would try replacing that first or if you're a tech, you might try to clean.

    good luck!
    ray

    This message was edited by ray on 4-28-05 @ 12:33 PM

  3. #3
    Had same problem today with HL2700CN. The opc belt(green imaging belt) is not making contact with HVoltage. Clean contacts and especially around the pads. Else swap it out.

  4. #4
    what is the charger belt ect for me to clean change as I have the same problem x

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •